Brass Steel Threaded Globe Valves Supplier in Iraq

(0 Reviews)

+971-563618951

What Are Brass Globe Valves?

Brass globe valves are used to control the flow of gases or liquids in pipe networks. They have a flexible disc or plug that may be raised or lowered with a stem to disclose or close the valve. The valve's design allows for precise flow rate control as well as fluid regulation and throttling. One of its most important qualities is its dependable shut-off, which provides leak prevention. Trusted Globe Valves providers in Iraq, such as Alkun Steels, can advise you further on its benefits and characteristics.

Additional Types Of Brass Globe Valves:

Angle Globe Valves: In confined spaces or pipe systems with limited clearance, globe valves with an inclined body make installation straightforward.
Straight Globe Valves: Straight body valves are typically used in applications where available space is not a factor.
Rising Stem: These valves have a rising stem that rises and falls in response to the disc's opening or closing, providing a clear indication of the valve's condition.
Non-Rising Stem: These valves have a stem that spins within the body of the valve while the disc merely opens or shuts with no obvious outward motion.

These brass globe valves come in a variety of sizes and specifications. Therefore, before installation it is recommended to consult a credible and certified brass steel threaded globe valve supplier in Iraq.

Type: Two-Piece, Full Bore, Lever Operated
Pressure Rating: 6-10mm PN50 • 15-50mm PN25
Temperature: -15°C to 120°C
Nominal Pressure: 1.6MPa
Working Medium: Water, Non-causticity liquid & Saturated Steam(≤0.6Mpa)
Working Temperature:-20°c≤t≤100°c
Parallel Pipe Thread: ISO228/1, BSP, NPT, etc
Size:1/2″, 3/4″, 1″,1 1/4″, 1 1/2″, 2″, 2-1/2″, 3″, 4″